Car License Plate Trajectory Backup Camera with Dynamic Moving Guide Line, GreenYi-59 2in1 960x720 Waterproof Night Vision Rear View Camera with Wide View Angle

Rear View Camera Features:

Two Methods to Install the License Plate Backup Camera No need to drill holes for license plate camera installation. If your state does not allow to cover information on the license plate, you can conceal the mount behind it.	2 in 1 Trajectory License Plate Reverse Camera This back up car camera is equipped with a bracket and a license plate holder to achieve two different mounting methods, namely bracket mounting and license plate mounting.	Reverse Camera with Universal RCA Connector Compatible with most display like normal TFT LCD monitors, Android radio head units, mirror monitors, and so on.

Reversing Camera with 4 Pin Connection Thinner Connector makes it more convenient to be installed, easier to get through small gaps or holes without damaging the car, no extra drilling	Backup Camera with Board Never Hot Applying the best material, the board will never get hot even after long time constant working.	Include Everything You Need Except usual rear view camera with video cable and power cable, we also add some extra gadgets such as RCA coupler, T-tap, zip ties and electrical tape... which could help you install the camera more conveniently.

	Car License Plate Trakectory Backup Camera	Trajectory 720p Backup Camera with Golden Rim	WIFI Backup Camera	AI Sensor Alarm Backup Camera	AHD 720P Backup Camera with Golden Rim	Trajectory Rear View Camera
Trajectory Guide Line	✓	✓				✓
Support AHD Video Signal		✓		✓
Resolution	960*720	1280*720	1280*720	1280*720	1280*720	960*720
View Angle	155 Degrees	170 Degrees	130 Degrees	170 Degrees	170 Degrees	170 Degrees
Support Front Camera			✓
Control Guide Line on/off			✓		✓

ATTENTION:

All of our 4-pin cameras can't be connected directly with any other monitors(no matter DVR monitor or dash monitor or whatever)without using our power cable.

About GreenYi:

We have concentrated on car accessories industry for over 10 years. We have always been doing all we can to provide high quality products with best service for our dearest customers. We persist that Customers’ Satisfaction Comes First.

Easy Installation without drilling:

1. Mount the Backup Camera to the vehicle’s license plate

2. Route the long video cable from camera to monitor

3. Connect the camera power cable to reverse light power supply

4. Adjust the camera body to an ideal angle and then fix it by tightening the screws

NOTE:

Please test the backup camera before routing video cable from back to front.

If your head unit doesn't have reversing trigger wire, then no need to use the trigger wires on the video cable.

There maybe two guidelines shown on your head unit, please change the setting of your device to turn off the original one.

Attention:

* Please have a test before final installation.

* If you connect GreenYi backup camera to a FACTORY RADIO, please order a suited Harness & Programmer separately, because different RADIO needs different Harness & Programmer.

* There is a reverse trigger wire on your head unit (pink color usually), please connect it with the video cable's triggering wire

* If the image on the screen is blurry, flickering or has horizontal/vertical strips, please check all your power and video connections. Try to use a different ground point(iron part) and wrap power and video plugs with electrical tape to insulate from interference. If still the same problem, please order a 12V DC power adapter filter rectifier to solve it, especially needed for Dodge VW AUDI BMW Mercedes Benz vehicles.

* Before you routing, if there is no image on the screen, other than check the camera, please check display setting as well. You can use other device with RCA connector, such as TV to check if the camera works.
Below are GreenYi Product List Link:
https://drive.google.com/file/d/1Hh5VrOtdEocbn9uUuHB4wQHZuq4ozo4W/view?usp=sharing
https://drive.google.com/file/d/1AJp8u7yQ4Ds1xkqOH1qAnBrfblKdBtPc/view?usp=sharing