Two Methods to Install the License Plate Backup Camera
No need to drill holes for license plate camera installation. If your state does not allow to cover information on the license plate, you can conceal the mount behind it.
2IN1 HD License Plate Reverse Camera
GreenYi back up car camera is equipped with a bracket and a license plate holder to achieve two different mounting methods, namely bracket mounting and license plate mounting.
AHD 720P Clear View Vehicle Camera
Compared to most other cameras with low definition, our camera shows much clearer image. BTW, if the monitor is not good enough, the image may not reach 720P effect.
Clear Image and Wide View Angle
Good clarity at day and night. 0.01flux illumination, good night vision effect. Horizontal angle is 150 degrees and diagonal angle is 170 degrees.
Front Back Camera with 4 Pin Connection
Thinner Connector makes it more convenient to be installed, easier to get through small gaps or holes without damaging the vehicle.
Three Switching Loops
White Wire: the camera shows mirror image by default, cut it for non-mirror image.
Green Wire: the camera comes with guide line by default, cut it to turn it off.
Orange Wire: the camera outputs CVBS video signal by default, cut it for AHD video signal.
Wide Application for Most Vehicles
GreenYi HD 720P license plate camera can be used as both front and rear view camera, also its wide working voltage(DC 12-24V) makes it compatible with most cars, SUV, RV, pickup, van, truck and so on.
Include Everything You Need
Except usual rear view camera with video cable and power cable, we also add some extra gadgets such as RCA coupler, T-tap, zip ties and electrical tape... which could help you install the camera more conveniently.
All of our 4-pin cameras can't be connected directly with any other monitors(no matter DVR monitor or dash monitor or whatever)without using our power cable.
About GreenYi:
We have concentrated on car accessories industry for over 10 years. We have always been doing all we can to provide high quality products with best service for our dearest customers. We persist that Customers’ Satisfaction Comes First.
Easy Installation without drilling:
1. Mount the Backup Camera to the vehicle’s license plate
2. Route the long video cable from camera to monitor
3. Connect the camera power cable to reverse light power supply
4. Adjust the camera body to an ideal angle and then fix it by tightening the screws
NOTE:
Please test the backup camera before routing video cable from back to front.
If your head unit doesn't have reversing trigger wire, then no need to use the trigger wires on the video cable.
There maybe two guidelines shown on your head unit, please change the setting of your device to turn off the original one.
Attention:
* Please have a test before final installation.
* If you connect GreenYi backup camera to a FACTORY RADIO, please order a suited Harness & Programmer separately, because different RADIO needs different Harness & Programmer.
* There is a reverse trigger wire on your head unit (pink color usually), please connect it with the video cable's triggering wire
* If the image on the screen is blurry, flickering or has horizontal/vertical strips, please check all your power and video connections. Try to use a different ground point(iron part) and wrap power and video plugs with electrical tape to insulate from interference. If still the same problem, please order a 12V DC power adapter filter rectifier to solve it, especially needed for Dodge VW AUDI BMW Mercedes Benz vehicles.
About Warranty: For all the products in our store, we offer two-year warranty for them. That means from the time you place the order within two years, if there is anything wrong with the products(under normal use of course), we will try our best to help you solve the problem. For example, you buy a backup camera in our store, and after half a year's usage, it goes wrong. After contacting us, you couldn't solve the problem by yourself, you can choose to send it back to us, then we will send a replacement or refund or if you got other ideas, we will consider it. If you need a new replacement, you will be responsible for the shipping cost of returning and we will resend it to you at our cost. About Shipping: We will start processing the orders after the payment is confirmed by the system. For most items, we have it in stock, and they will be shipped out within 24 hours after the payment is confirmed by the system. Usually, we will ship out the parcels by the default shipping method. However, we will change the shipping method under some situations like remote area, better shipping methods for both sellers and buyers.
We will not be responsible for any Custom Duty or Import Tax charged by the custom. We can’t control this, hope you could understand. If you have special requests on the declare value, please let us know, we will try our best to meet your need.